Which Fabric Where: A Buyer's Guide to Kravet Upholstery, Lyocell, and Viscose

Posted on 2026-11-20 by Jane Smith

I'm not a designer. I'm the person who signs the purchase order after the designer has left the room, then eats the budget overrun when something arrives wrong. Office administrator for a 180-person company. I handle facilities and FF&E ordering — roughly $340,000 a year across 11 vendors — and I report to both operations and finance. Nobody trains you for the fabric part of this job. You learn it by getting burned.

Here's the thing I wish someone had told me when I took over purchasing in 2020: there isn't one right fabric. There are at least four right fabrics, depending on where the yardage is going. Asking "which fabric should we use" without saying what it's for is like asking a contractor whether 2×4 or 2×10 is better.

So this is how I actually sort it now. Four scenarios, four different answers, and a short set of questions at the end to figure out which one you're in.

The four buckets I sort every fabric request into

Two questions do most of the work. First: how many bodies touch this thing in a day? Second: what's the environment — sun, food, weather, or a lobby nobody sits in?

  • Scenario 1: Seating that gets used hard — lobby, break room, conference rooms, waiting areas.
  • Scenario 2: Drapery, Roman shades, and decorative panels — including most lyocell and viscose blends.
  • Scenario 3: Outdoor and covered patio.
  • Scenario 4: The statement piece that's mostly looked at and rarely sat on.

They're not evenly distributed, either. In our 2024 office consolidation — 180 people, three floors down to two — about 70% of the yardage was Scenario 1 and 2. Scenario 4 was maybe 15 yards. But that 15 yards caused more meetings than the other 85% combined.

Scenario 1: Seating that gets used hard

This is where the money goes and where the cheap decision comes back to bite you. If a chair is in a shared space and gets sat on by 30 different people a week, I don't care how beautiful the hand is. I care about abrasion, backing, cleaning code, and whether the color will survive a decade of jeans.

What I actually check

Abrasion ratings first. Wyzenbeek double rubs (ASTM D4157) or Martindale cycles (ASTM D4966) — they're different tests, so don't compare the numbers directly. My rule of thumb: 15,000 double rubs is light residential duty, 30,000 is heavy residential, and anything I'm putting in a shared office I try to keep at 50,000 or above. The Association for Contract Textiles publishes performance guidelines that are worth reading once, carefully, because they'll tell you the same thing a rep will: abrasion resistance is one property, not a durability guarantee.

"Double rubs tell you how the fabric handles abrasion. They don't tell you how it handles coffee, sunlight, or a staple gun."

That's a paraphrase of something a rep said to me years ago and I've repeated it about forty times since.

Beyond abrasion: is there a knit or acrylic backing? Backing adds cost and adds stability, and on a tight seat it's usually worth it. What's the cleaning code — W, S, WS? If it's S-only (solvent cleaner), our janitorial crew can't touch it, and I have to budget for professional cleaning. Does the dark navy or the deep charcoal crock? Dark piece-dyed colors are notorious for rub-off on light upholstery; ask for the crocking result (AATCC 8) if the piece has a lot of dark dye.

Kravet's contract line is where I usually start for this bucket, mostly because the sample books tell you what you need to know without a scavenger hunt. Kravet upholstery fabric in the contract range tends to publish double rubs, cleaning codes, and lightfastness right on the back of the memo. That sounds like a small thing. It isn't — I've spent entire afternoons on vendor websites that hide the abrasion rating behind a login.

The $1,200 mistake

In 2022 I found what looked like an identical plain weave from a budget source — $1,200 cheaper across the whole order for a 24-seat break room refresh. Same color, same weight to the touch, and I approved it without requesting a memo against the actual seat cushion. Eight months later the seats were pilling at the front edge, the fabric had lost its shape at the crown, and we reupholstered all 24 pieces for $6,800 plus three weeks of a closed break room. Net loss on paper: about $5,600. Net loss in credibility with my VP: larger.

Now I don't approve anything I haven't seen as a physical memo, and I don't approve a memo I haven't seen wrapped on an actual foam block. A swatch in your hand is not the same as a swatch on a radius.

Scenario 2: Drapery and decorative panels (where lyocell and viscose earn their place)

Here's the part that took me two years to stop getting wrong. The fibers I avoid in Scenario 1 are genuinely good in Scenario 2. Different job, different answer.

What viscose fabric actually is

Viscose is a regenerated cellulose fiber — wood pulp (often eucalyptus, beech, or pine) broken down chemically and reformed into filament. Same broad family as rayon; in the US you'll usually see it labeled "rayon" on the product tag, while European suppliers say viscose. It drapes like a dream, takes dye beautifully, feels cool and slightly slippery, and costs less than silk by a mile.

What it doesn't do: hold up under abrasion, keep its shape when wet, or tolerate careless cleaning. Wet strength is low — a viscose panel soaked and hung wrong can stretch out of true and stay that way. It wrinkles. It can shrink. For a drapery panel that hangs still and gets vacuumed twice a year, none of that matters. For a dining chair, all of it matters.

Lyocell fabric characteristics, in plain English

Lyocell is the newer regenerated cellulose. Instead of the older viscose chemistry, the pulp is dissolved in an amine-oxide solvent (N-methylmorpholine N-oxide, if you want the full name) and spun, with most of the solvent recovered and reused — which is why you keep hearing "closed loop" attached to it. The FTC gave lyocell its own generic fiber name back in the 1990s, so it's legally distinct from rayon; TENCEL™ is the best-known brand of it, not a separate fiber.

Practical characteristics, as someone who's ordered it and then dealt with the aftermath:

  • Higher wet and dry strength than viscose — it holds up better to washing and to hanging damp.
  • Better dimensional stability. Less "why is this panel two inches longer than the other one."
  • Soft hand and excellent drape, similar to viscose, sometimes a bit cooler and smoother.
  • Can fibrillate — surface fuzz or a slight peachiness after abrasion or wet processing. In blends and finished apparel-grade fabric it's usually controlled; in a cheap unbrushed piece it isn't.
  • Not a performance fiber. It's a comfort-and-beauty fiber.

So: lyocell and viscose both belong in drapery, Roman shades with a lining, decorative pillows, and anything that's touched more than it's sat on. Neither belongs on a lobby sofa.

What I check anyway on drapery

Commercial drapery usually has flammability requirements — NFPA 701 is the one I get asked about most, and the certificate needs to match the actual fabric, not the collection. Lightfastness matters if the windows face south; AATCC 16 results in hours, and I want to see a number for anything in direct sun. And I ask, out loud, "how is this cleaned?" Because if the answer is dry-clean-only and we've got 14 panels, I need to know what that costs per year before I sign.

One more thing: I have genuinely mixed feelings about the anti-stain and anti-crease finishes that show up on a lot of these blends. On one hand they extend the useful life of a pale drapery panel by years. On the other, the chemistry keeps changing and I'm not qualified to evaluate it, so I ask the rep what's actually in the finish and whether there's a version without it. Half the time there is. Worth asking.

Scenario 3: Outdoor and covered patio

I'll be blunt: "outdoor fabric" is a marketing term, not a standard. There's no certification behind that word. What's behind it is usually solution-dyed acrylic or a proprietary olefin, and the difference between a good one and a bad one shows up in year two.

What I want to see: solution-dyed (the pigment goes into the fiber, not on it), lightfastness hours in the high hundreds to 1,000+ per AATCC 16, bleach-cleanability if the piece is near food service, and mildew resistance I can ask about directly. I also want to see the back of the cushion — drainage, venting, quick-dry foam. A great fabric on a foam block that holds water is a mildew farm with nice upholstery.

And no. Please don't put viscose or lyocell outside. Not even under a covered patio. Not even "just for the summer." I watched a beautiful lyocell-blend cushion get rained on once and it never fully recovered its shape. It's a lovely fiber and it deserves better than that.

One trap: not everything labeled "performance" is outdoor-rated, and not everything outdoor-rated is contract-grade. Those are two different claims and reps sometimes use them interchangeably. Ask which one you're getting.

Scenario 4: The statement piece (and where I break my own rule)

I spend most of my working life arguing that the cheapest option isn't the cheapest option. So here's the counterintuitive part: for Scenario 4, the cheap one is sometimes correct.

If a bench in our reception area is going to be replaced in three years at the next design refresh, and roughly six people sit on it per day, and it's mostly there to be photographed — I don't need 100,000 double rubs. I don't need a $190-a-yard couture print. A mid-tier fabric at a third of the price does the job, and the money is better spent on the piece that everyone actually touches. Buying durability you will never use is just as wasteful as buying a fabric that fails early.

What I do spend on in this bucket: the memo, the dye lot confirmation, and the yardage math. Because here's the number people forget — a print with a 27-inch vertical repeat is going to eat 20–30% more yardage than a plain, and a railroaded plain can cut your waste down again. That $190 fabric with the big repeat might total out closer to $250 per usable yard once you've paid for the waste. The $60 railroaded plain might be the more expensive-looking result for less money. I've run that calculation wrong twice.

Also: call Kravet or your rep and confirm the current production dye lot before you order anything with a print or a saturated color. A memo is not a production lot. I assumed they were the same thing once. They are not.

How to tell which scenario you're in

Answer these honestly and the answer usually falls out:

  1. How many people touch it daily? Under five and mostly decorative → Scenario 4. Fifteen or more → Scenario 1.
  2. Is food or drink nearby? Yes → Scenario 1 rules apply even if the piece is pretty.
  3. Direct sun? More than two hours a day → check lightfastness numbers, and consider Scenario 2 or 3 depending on exposure.
  4. Who cleans it? If it's your own staff with a spray bottle, you need W or WS and a stain-resistant finish. If it's a contracted cleaner, S is survivable.
  5. How long until the next refresh? Three years and a known replacement date → you can buy cheaper than your instincts tell you. Ten years or unknown → buy the abrasion rating.

If you land in two buckets because a piece is both high-touch and photogenic, you're in Scenario 1. The photogenic part is a nice-to-have. The pilling part is a phone call from your boss.

Rough numbers, with the usual caveat

I don't have hard data on industry-wide pricing, and I'd be suspicious of anyone who claims to. What I can say anecdotally, from the last four years of purchase orders: mid-tier branded upholstery in the contract range has generally landed somewhere in the $40–$90 per yard band for us, decorative drapery blends a bit lower, and couture or large-repeat prints can run several times that. Trade net pricing is different from list, and it varies by account — so treat those as orientation, not a quote. Prices as of early 2025; verify current rates with your rep.

What I'd actually tell a new admin buyer: the memo is usually free and it arrives in three days. Order it. Then put it on the real foam, in the real light, and leave it there for a week before you sign the PO. That one habit has saved me more money than every pricing negotiation I've ever done combined.

Leave a reply

Your email address will not be published.